Other information:
Putting the spare wheel back in place
Put the spare wheel back in place in its
housing.
Slacken the nut on the bolt by a few turns.
Position the fastening device (nut and bolt) in
the middle of the wheel.
Tighten the central nut sufficiently to retain
the wheel correctly.
Depending on version, put the tool box back
in place in the middle of the wheel and clip it in
place.
After c..
Parking the vehicle
Immobilise the vehicle where it does
not obstruct traffic: the ground must be level,
stable and non-slippery.
With a manual gearbox, engage first gear
to lock the wheels, apply the parking brake, unless it is programmed to be in
automatic
mode, and switch off the ignition.
With an automatic gearbox, select mode P
to lock the wheels, apply the parking brake,
unless it is..