Citroen C3: Warning and indicator lamps / Green and Blue warning/indicator lamps. Black/white warning lamps
Green and Blue warning/indicator lamps
Blind spot monitoring (only on the LCD text instrument panel)
Fixed.
The function has been activated.
Stop & Start
Fixed.
When the vehicle stops, the Stop & Start puts the engine into STOP mode.
Flashing temporarily.
STOP mode is momentarily unavailable or START mode is automatically triggered.
Direction indicators
Flashing with audible signal.
The direction indicators are on.
Sidelamps
Fixed.
The lamps are on.
Front foglamps
Fixed.
The front foglamps are lit.
Automatic headlamp dipping
Fixed.
The function has been activated via the touch screen (Driving / Vehicle menu).
The lighting control stalk is in the "AUTO" position.
Dipped beam headlamps
Fixed.
The lamps are on.
Blue warning/indicator lamps
Main beam headlamps
Fixed.
The lamps are on.
Black/white warning lamps
Foot on the brake
Fixed.
Omission or insufficient pressure on the brake pedal.
With an automatic gearbox, with the engine running, before releasing the parking brake, to move out of position P.
Foot on the clutch (only on the LCD symbols instrument panel)
Fixed.
Stop & Start: the change to START mode is rejected because the clutch pedal is not fully depressed.
Fully depress the clutch pedal.
Orange warning/indicator lamps
Engine self-diagnostics system
Flashing.
The engine management system has a
fault.
There is a risk that the catalytic converter will be
destroyed.
You must carry out (2)...
Indicators
..
Other information:
Citroen C3 2016-2025 Owners Manual: Changing a wiper blade
Removing/refitting at the front Carry out these wiper blade replacement operations from the driver's side. Starting with the wiper blade farthest from you, hold each arm by the rigid section and raise it as far as possible. Take care not to hold the arms at the jet locations. Do not touch the wiper blades. Risk of irreparable deformation. Do not release them while moving them. Risk ..
Citroen C3 2016-2025 Owners Manual: Removing the spare wheel
Unclip the tool storage box (standard spare wheel). Slacken the central nut. Remove the fastening device (nut and bolt). Lift the spare wheel towards you from the rear. Take the wheel out of the boot. If there is no wheel in the well, the fastening device (nut and bolt) cannot be refitted...
Categories
- Manuals Home
- 3rd Generation C3 Owners Manual
- 3rd Generation C3 Service Manual
- Bonnet
- Pairing a Bluetooth® telephone
- Service indicator
- New on site
- Most important about car
