Citroen C3: Cruise control / Switching on/pausing. Changing the cruise speed setting
Switching on/pausing
- Turn thumbwheel 1 to the "CRUISE" position
to select cruise control mode; the function is
paused.
- Press button 2 or 3 to activate cruise control
and save a speed setting when the vehicle has
reached the desired speed; the vehicle’s current
speed is saved as the speed setting.
- Release the accelerator pedal.
- Pressing button 4 temporarily pauses the
function.
- Pressing button 4 again restores operation of
the cruise control (ON).
Changing the cruise speed setting
The cruise control must be active.
To change the cruise speed setting, based on
the vehicle’s current speed:
- In +/- 1 mph (1.6 km/h) steps, briefly press
button 2 or 3 as often as necessary.
- Continuously, in steps of +/- 5 mph (8 km/h),
press and hold button 2 or 3.
Pressing and holding
button 2 or
3 results in a rapid change in the speed
of your vehicle.
As a precaution, we
recommend setting
a cruise speed similar to the vehicle’s
current speed, to avoid any sudden
acceleration or deceleration.
To modify the cruise speed setting using the
speed suggested by the Speed Limit Recognition
and Recommendation shown on the instrument
panel:
- Press button 5 once; a message is displayed
to confirm the memorisation request.
- Press button 5 again to save the suggested
speed.
The speed is immediately shown on the
instrument panel as the new speed setting.
Temporarily exceeding the programmed speed
If needed (when overtaking, for example) it is
possible to exceed the programmed speed by
pressing the accelerator pedal...
Other information:
The Diesel BlueHDi engines are equipped with
a system that associates the SCR (Selective
Catalytic Reduction) emissions control system
and the Diesel particle filter (DPF) for the
treatment of exhaust gases. They cannot
function without AdBlue® fluid...
Example of a "voice command" for
navigation:
"Navigate to address, 11 Regent Street,
London".
Example of a "voice command" for the radio and
media:
"Play artist, Madonna".
Example of a "voice command" for the
telephone:
"Call David Miller".
The voice commands, with a
choice of 12
languages (English, French, Italian,
Spanish, German, Dutch, Portuguese, Polish,
Turkish, Russian, Arabic, Br..