Citroen C3: Remote control / Key / Unlocking/Locking the vehicle
Unlocking the vehicle
Press this button to unlock
the vehicle.
When the unlocking button is pressed, the
flashing of the direction indicators for a few
seconds signals:
- The unlocking of the vehicle for versions
without alarm.
- The deactivation of the alarm for other
versions.
Locking the vehicle
Normal locking
Press this button.
When the locking button is pressed, the lighting
of the direction indicators for a few seconds
signals:
- The locking of the vehicle for versions without
alarm.
- The activation of the alarm for other versions.
If one of the doors or the
boot is not fully
closed, the locking does not take place.
However, if the vehicle is equipped with the
alarm, it is fully activated after about 45
seconds.
If the vehicle is unlocked inadvertently and
there is then no action on the doors or boot,
the vehicle will automatically lock itself again
after about 30 seconds. If the alarm was
activated beforehand, the alarm is reactivated
automatically.
Deadlocking
Press the locking button again within 5
seconds to deadlock the vehicle (confirmed by
the temporary lighting of the direction indicators
for versions without alarm).
Deadlocking renders the
interior door
controls inoperative. It also deactivates
the central locking button.
The horn remains operational.
Never leave anyone inside the vehicle
when it is deadlocked.
The key built into the remote control can be
used for the following operations, depending on
version:
Unlocking/Locking/Deadlocking the vehicle.
Activation/Deactivation of the manual child
lock...
Locating the vehicle
This function helps you to spot your vehicle from
a distance, with the vehicle locked:
The sidelamps and dipped beam headlamps
come on for 30 seconds...
Other information:
The fusebox is located in the engine
compartment, near the battery.
Accessing the fuses
Unclip the cover.
Replace the fuse.
After the operation, close the cover very
carefully to ensure correct sealing of the
fusebox.
Table of fuses
..
Pairing a Bluetooth® telephone
As a safety measure and
because it
requires sustained attention by the driver,
the pairing of a Bluetooth mobile telephone
with the Bluetooth hands-free system of your
audio system must be done with the vehicle
stationary and the ignition on.
Activate the Bluetooth
function on the
telephone and ensure that it is "visible to
all" (telephone configuration)...