Never look too closely at
the luminous
beam of LED lamps: risk of serious eye
injury!
In some weather conditions
(e.g. low
temperature or humidity), misting on the
internal surface of the glass of the headlamps
and rear lamps is normal, and will disappear
after the lamps have been on for a few
minutes...
Other information:
Before changing a fuse:
Identify the cause of the fault and fix it.
Stop all power consumption.
Immobilise the vehicle and switch the ignition
off.
Identify the defective fuse using the current
allocation tables and diagrams.
To replace a fuse, it is essential to:
Use the special tweezers to extract the fuse
from its housing and check the condition of its
filament...
Petrol fuels conforming to the EN228 standard
containing up to 5% and 10% ethanol
respectively.
Diesel fuels conforming to the EN590, EN16734
and EN16709 standards and containing up to
7%, 10%, 20% and 30% fatty acid methyl ester
respectively. The use of B20 or B30 fuels, even
occasionally, imposes special maintenance
conditions referred to as "Arduous conditions"...