Citroen C3: Lighting and visibility / Guide-me-home and welcome lighting
Guide-me-home lighting
Automatic
With the ring in the "AUTO" position, when the
light is poor, the dipped beam headlamps come
on automatically when the ignition is switched
off.
You can activate/deactivate this function and
adjust the guide-me-home lighting duration in
the vehicle configuration menu.
Manual

- With the ignition off, pull the lighting control
stalk toward you ("headlamp flash") to activate/
deactivate the function.
Manual guide-me-home lighting goes off
automatically after a period of time.
Welcome lighting
With the "Automatic headlamp illumination"
function activated, in poor light, the sidelamps
and dipped beam headlamps come on
automatically when the vehicle is unlocked.
Activation, deactivation and the duration of the
exterior welcome lighting are set in the vehicle
configuration menu.
These lamps at the front and rear of the vehicle
light up automatically when the engine starts.
They perform the following functions:
Daytime running lamps (lighting control stalk
at position "0" or "AUTO" with adequate ambient
light)...
When the ring is in the "AUTO” position, this
system automatically switches between dipped
and main beam headlamps according to the
lighting and traffic conditions, using a camera
located at the top of the windscreen...
Other information:
This system gives access to the following
elements:
Audio system and telephone controls and
display of related information.
Vehicle function and equipment setting menus.
For safety reasons, always
stop the
vehicle before performing operations
that require sustained attention...
Pull the wiper control stalk towards you and
hold.
The screenwash then the windscreen wipers
operate for a pre-determined time.
The screenwash jets are
not adjustable.
Do not handle them (risk of damage).
To avoid damaging the
wiper blades, do
not operate the screenwash if the
screenwash reservoir is empty...