Citroen C3: Wiper control stalk / Rear wiper

- Turn the ring to align the desired symbol with
the marking.
Off
Intermittent wipe
Wash-wipe
Reverse gear
When reverse gear is engaged, the rear wiper
will come into operation automatically if the front
windscreen wipers are operating.
This function is set via the
Driving / Vehicle touch screen menu.
In the event of
accumulation of snow or
hard frost or if a bicycle carrier is fitted to
a towing device, deactivate the automatic rear
wiper via the touch screen's Driving/ Vehicle
menu.
Pull the wiper control stalk towards you and
hold.
The screenwash then the windscreen wipers
operate for a pre-determined time.
The screenwash jets are
not adjustable...
This maintenance position is used while cleaning
or replacing the wiper blades. It can also be
useful, in wintry weather (ice, snow), to release
the wiper blades from the windscreen...
Other information:
Before changing a fuse:
Identify the cause of the fault and fix it.
Stop all power consumption.
Immobilise the vehicle and switch the ignition
off.
Identify the defective fuse using the current
allocation tables and diagrams.
To replace a fuse, it is essential to:
Use the special tweezers to extract the fuse
from its housing and check the condition of its
filament...
Air intake
The air circulating in the passenger compartment
is filtered and originates either from the
exterior, via the grille located at the base of the
windscreen, or from the inside in air recirculation
mode.
Controls
Depending on version, the controls are
accessible in the "Air conditioning" touch
screen menu or are grouped together in the
control panel on the centre console...