Citroen C3: Under-inflation detection / Reinitialisation. Malfunction
Reinitialisation
The system must be reinitialised after any
adjustment to the pressure of one or more tyres,
and after changing one or more wheels.
Before reinitialising the
system, make
sure that the pressures of the four tyres
are correct for the conditions of use of the
vehicle and conform to the values written on
the tyre pressure label.
Check the pressures of the four tyres before
performing the reinitialisation.
The system does not advise if a pressure is
incorrect at the time of reinitialisation.
The reinitialisation of the system is done with the
ignition on and the vehicle stationary:
- Via the vehicle configuration menu for vehicles
fitted with a touch screen.
- Via the instrument panel display screen or via
the button on the dashboard for vehicles without
a screen.
- Via the instrument panel display screen for
vehicles without a screen.
With the vehicle stationary, the
system is
reinitialised via the Driving/Vehicle touch
screen menu.
Instrument panel display screen
Press this button briefly
to go to the
menu.
- Select the corresponding item then confirm.
Reinitialisation is confirmed by a high-pitched
audible signal.
A deep tone audible signal indicates that the
reinitialisation has not been done.
Malfunction
These warning lamps come on in
the event of a malfunction.
A message appears, accompanied by an audible
signal.
In this case, the tyre under-inflation monitoring
function is no longer performed.
Have the system checked by a CITROËN dealer
or a qualified workshop.
This is signalled by the fixed
illumination
of this warning lamp, accompanied by an
audible signal and, depending on equipment, the
display of a message...
(Depending on country of sale.)
This camera, installed at the top of the
windscreen and connected wirelessly, allows
you to:
Take photos and videos on demand and share
them...
Other information:
High-gloss paint
Do not use abrasive
products or
solvents, petrol or oil to clean the
bodywork.
Never use an abrasive sponge to clean
stubborn stains. Risk of scratching the
paintwork!
Do not apply polish in strong sunshine, or to
plastic or rubber parts...
With the engine running, a press
mutes
the sound.
With the ignition off, a press turns the system on.
Increase or decrease the volume
using
the thumbwheel on the left-hand side.
To access the menus, press this
button
on the touch screen.
Press the back arrow to go back a level...