Citroen C3: Ease of use and comfort / Boot fittings

- Rear shelf
- Hooks
- Storage box
- Lighting
- Stowing rings
- Warning triangle
Storage well

- Fully raise the boot carpet to access the
storage well.
Depending on version, it includes:
- A towing ring.
- A hazard warning triangle.
- A temporary puncture repair kit with the tool
kit.
On versions with a storage
well, the
storage well must be put back in place
before loading the boot.
Hooks

They are used to hang shopping bags.
Take care to only hang
lightweight bags.
Rear shelf

To remove the shelf:
- Unhook the 2 cords.
- Gently raise the shelf, then remove it.
There are several ways of storing it:
- Either upright behind the front seats.
- Or flat on the bottom of the boot.
Boot lamp
It comes on automatically when the boot is
opened and goes off automatically when the
boot is closed.
The lighting time varies according to the
circumstances:
- when the ignition is off, approximately 10
minutes.
- in energy economy mode, approximately 30
seconds.
- with the engine running, unlimited.
Sun visor
Glove box
12 V accessory socket (max. 120 W).
USB socket
Open storage with double cup holder
Front armrest (depending on version)
Storage trays
Mat (depending on version)
Sun visor
The driver's sun visor is fitted with a vanity mirror
with concealing flap and a card holder (or ticket
holder)...
This conceals the interior of the vehicle in
combination with the existing shelf.
Do not place objects above
the load stop.
If your vehicle is fitted with a protective grille, you
can place objects above the load stop...
Other information:
Starting
With a manual gearbox, place the gear lever
in neutral and fully depress the clutch pedal.
With an automatic gearbox, select mode P
or N and press the brake pedal.
Press the "START/STOP" button while
maintaining pressure on the pedal until the
engine starts...
Selecting a station
Press Radio Media to
display the main
page.
Press one of the buttons to
perform an
automatic search for radio stations.
Or
Move the slider to manually
search for
frequencies up or down.
Or
Press the frequency.
Enter the FM and AM waveband
values
using the virtual keypad...