Citroen C3 Manuals

Citroen C3: Automatic gearbox / Starting the vehicle

  • Citroen C3. Starting the vehicle With your foot on the brake pedal, select position P or N.
  • Start the engine.

    If the conditions are not met, you will hear an audible signal, accompanied by the display of a message.

  • With the engine running, press the brake pedal.
  • Release the parking brake, unless it is programmed to automatic mode.
  • Select position R, D or M.
  • Gradually release the brake pedal. The vehicle moves off immediately.

Citroen C3. Starting the vehicle If position N is selected inadvertently while driving, allow the engine to return to idle, then select position D to accelerate.

Citroen C3. Starting the vehicle When the engine is running at idle with the brakes released, if position R, D or M is selected, the vehicle moves even without the accelerator being pressed.

Never leave children unattended in the vehicle when the engine is running.

When carrying out maintenance with the engine running, apply the parking brake and select position P.

    Information displayed on the instrument panel

    When a position is selected in the grate with the gear selector, the corresponding indicator lamp lights up on the instrument panel. P. Park R. Reverse N...

    Automatic operation

    Select position D for automatic changing of the six gears. The gearbox then operates in auto-adaptive mode, without any intervention on the part of the driver...

    Other information:

    Citroen C3 2016-2021 Owners Manual: Changing a fuse


    Before changing a fuse: Identify the cause of the fault and fix it. Stop all power consumption. Immobilise the vehicle and switch the ignition off. Identify the defective fuse using the current allocation tables and diagrams. To replace a fuse, it is essential to: Use the special tweezers to extract the fuse from its housing and check the condition of its filament...

    Citroen C3 2016-2021 Owners Manual: Parking sensors


    Refer to the General recommendations on the use of driving and manoeuvring aids. Using sensors located in the bumper, this system signals the proximity of obstacles (e.g. pedestrian, vehicle, tree, barrier) present in their field of detection. Rear parking sensors The system is switched on by engaging reverse gear, which is confirmed by an audible signal...

    Categories

    Copyright © 2021 www.citroenc3.org